Shielding Solutions - EMF Hunters

EMF HUNTERS
Go to content

Shielding Solutions

Solutions
Bedroom Shielding with Shielding Paint:
Whilst any room in your house can be shielded, we will most frequently advise to shield the bedroom, first, as our bodies rejuvenate and recover overnight. Frequently clients find their quality of sleep improves significantly after shielding.
Dr Klinghardt recommends sleeping in a low EMF environment and we follow his protocols during our home EMF surveys.

An important aspect of shielding is to look at the most cost effective solution which varies from client to client. I also work with a builder who can carry out the works if that is required. Often the best solution is to shield the bedroom with shielding paint on walls and ceiling, mesh on the floor, earth both (to remove LF radiation), place shielding fabric behind the curtains or blinds.
Demand switches and ‘kill’ switches may also be used to reduce LF Radiation, and Geopathic Stress may be addressed in a number of ways.

In addition to bedroom shielding, we offer plug-in devices which harmonize the damaging aspects of the EMF and can have a beneficial effect throughout the house during the day time.
Typical costs for creating an EMF Free environment with Shilding Paint
Shielding Materials: £600 to £1,000

The total coast largely depends on the amount of paint used (size of room and number of coats)  and curtain shielding fabric required  and will include:

 1. Shielding paint and earthing tape – walls and ceiling
 2. Mesh and earthing strip for floor (not required for ground floor)
 3. Backing shielding fabric for curtains

Supervision costs: £100 to £500 - Depends on duration and frequency of visits
Labour costs: £1,000 to £1,200 This usually take 2-3 days to complete and includes:

1. Application of primer concentrate to walls, ceiling and woodwork
2. Application three coats shielding paint (black) walls and ceiling
3. Lift carpet staple mesh to floor
4. Earth paint and mesh
5. Relay carpet


If required, we can decorate the room with paint provided by the client for an additional cost. Some clients prefer to apply the top coats themselves.

Should a client chose to do the work him / her self we can assist with giving  guidance and advise on how to properly shield the room through a visit or video calls, for an extra small free.
Shielding the bed – CANOPIES:
There are circumstances where for one reason or another (such as in a rented property) it may not be practical or desirable to shield the whole room. In this case another well-proven possibility is to use a canopy over the bed. These measures dramatically reduce the levels of radiation in the bedroom. Dr Klinghardt recommends sleeping in a room with a HF level of 5 microwatts per meter squared or less. Geovital recommend sleeping with less than 30-50 microvolts in the body and less than 30 V/M for low frequency.

The above video will show you the dramatic radiation reduction that can be realized with a canopy - Please note that the canopy type and prices in the video may vary. Canopies comes in different shapes and forms and prices may vary depending on their sizes, materials (type of fabric) and  shielding capabilities.
We have teamed up with best suppliers of canopies, as well as more general EMF shielding materials and solutions.

The material that we recommend for canopies are breathable and of superior quality and shielding performance and 5G ready, with a shielding attenuation of 34 dB at 40 GHz. It can also be earthed, thereby shielding against low frequency (LF) as well as high frequency (HF) radiation.

Prices for these free standing or dome canopies are extremely reasonable, starting at £850 - £1100 including installation, earthing mat  ans earthing kit.

Here is a review from a ahappy client on the canopy - please get in touch should you have any questions.
Shielding with Blanket
You can also shield with this thin blanket made from Steel-Grey for high and low frequencies.

Easy and quick protection on the couch, in the bed, on holiday, on business trips or while playing console games.

Steel-Grey is a compact woven cotton/polyester/stainless-steel fabric. Steel-Grey contains very fine stainless steel threads, that feels on the skin like a little scratchy woollen sweater. But on the couch with clothing or in the bed with a pyjama nothing scratches.


Nevertheless we recommend this fabric, because its very wash-resistant and much more durable than all other fabrics!

  • This product shields high frequency electromagnetic fields (HF). The indicated dB-values apply to 1 GHz, view chart for other frequencies. Laboratory report ranging from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006, view report above.

  • This product with an electrically conductive surface shields low-frequency alternating electric fields (LF). For this purpose a grounding is necessary, i.e. an integration into the functional-equipotential bonding
Back to content